Welcome to Dewlink

Sludge Dewatering Pioneer

Inventors of Tubox ® & Swingmill ® technologies

Dewatering for a Cleaner World

Specialising in the research, design, development and supply of sludge dewatering devices and polymer make-up systems. 

Our Tubox.® & Swingmill.® unique designs represent the next generation of dewatering, utilising the latest technology with non-contact, non-abrasive components to provide superior performance, increased efficiency and diminishing maintenance costs.

Our compact modular systems are the most effective, efficient and economical dewatering machines on the market, dramatically reducing the cost of sludge and waste-water treatment.

Dewlink provides the advice and the solutions for all of your sludge and waste-water needs

Sludge Dewatering Systems

MixCycle

Polymer makeup system available for powder and emulsion. Efficient mixing and accurate dosing.

Tubox

Mixing tank with high speed mixing tube, creating a collision effect leading to faster flocculation.

Swingmill

For thickening and dewatering sludge through pressure filtration and unique ring movements.

Dehydrator

The complete sludge dewatering solution consisting of the MixCycle, Tubox and Swingmill.

Increasing Efficiency and Reducing Costs

reduce power comsumption

The high throughput capacity design allows the components to run at a consistently low speed, consuming very little power, making the Swingmill.® one of the most efficient sludge dewatering devices available on the market.

polymer

The efficiency and effectiveness of our system decreases polymer usage by approximately 30%.  Less polymer reduces operating costs and provides better overall results.

increase efficiency

A Combination of the Tubox.® & Swingmill.® technologies can improve the sludge handling capacity by approximately 20%.  Our dual screw configuration and pendulum ring motion allows a higher throughput capacity with an increase in the recovery rate of the solid.

Maintenance

The unique pendulum movement of the rings eliminates clogging, reducing wash down and maintenance costs. The non-contact, non-abrasive mechanism also reduces wear, increasing durability.

Versatile

The versatile Tubox.® and Swingmill.® devices are suitable for a myriad of industries, being capable of successfully dewatering a wide variety of sludges. 

If it can flocculate, we can dewater it!

Programmable

Our Sludge dewatering systems are fully programmable, with automated 24 hour start-stop unattended operations.  We reduce the labour costs and set-up time whilst offering you the ability to memory store different settings for different processes.

no deformation

Compared to traditional / conventional screw-presses, our non-contact, non-abrasive mechanism, increases the lifespan of the moving rings from 10,000 to 100,000 hours and the screw from 30,000 to 100,000 hours.

Water

The flexibility of adjustment in the speed of the screws and the moving rings can capture more water and reduce the volume of the solids, all this without sacrificing throughput. A lower volume of solids offers reduced disposal costs and a greener / cleaner environment / world.

Latest Projects

We work with different Industries to solve their sludge dewatering problems.  Providing chemistry and dewatering to reduce volume for cheaper transportation and easy disposal.

We have many ongoing projects, whether it’s solving our client’s sludge problems, being involve in research and development of our polymer make-up and dewatering systems or conducting various test onsite within different Industries.  We are committed to provide the best and most effective solution to solve the problem of sludge dewatering and sludge removal.

For more information please contact our sales team at sales@dewlink.com

DAF sludge

Lamb Abattoir

The improved DSM-501-D Swingmill with Tubox and ultrasonic sensors was installed to dewater DAF sludge from a lamb abattoir.  It greatly eliminated time and costs for removing the sludge.

CAF Sludge dewatering

Glass Production

A complete Swingmill solution was installed for a glass production site.  It consisted a Swingmill, sludge tank, level sensors, pumps, touchscreen control panel, all with IP66 protection and a Polymore chemical dosing unit.

Swingmill pilot test

Cavitation Air Flotation

The all new DSM-121-S Swingmill including a twin tank polymer make-up system was used to dewater CAF sludge from a glass manufacturer.  The system was easy to setup and it achieved excellent results.

non wearing screwpress

Gut Content Abattoir

The lamb abattoir requires to reduce the volume of DAF sludge and gut contents after slaughtering.  They require a system that can cope with a high level of grease and fat without the fear of clogging.

flocculator

Food Processing Plant

The plant produces 30m³ of DAF sludge every day.  The sludge is transported away on a daily basis without dewatering, leading to a higher cost of disposal.

screwpress clear filtrate

Pulp and Paper Mill

One of the biggest paper company in the world require a dewatering system, that can cope with high fibre sludge without clogging and able to operate under high humidity.

sludge cake

Rendering Plant

A belt press dewater 100m³ of DAF every week.  They are old and requires frequent maintenance.  The Swingmill is a cheaper alternative for the rendering plant, reducing running and maintenance costs with drier sludge cake.

non wearing swingmill screwpress

Vegetable Plant

A manufacturer of vegetable product installed a new DAF system and the Swingmill was chosen to dewater the sludge.

News and Media

Please connect with us for the latest updates on our next generation sludge dewatering screw press and services or for any information please feel free to contact our sales team at sales@dewlink.com

For our latest News you can connect with us on Facebook, Linkedin, YouTube and Twitter.  To see our next generation sludge dewatering screw press in action please Click Here

Please also visit our Blog for the latest development in our Swingmill and Tubox technology.

Latest News

non-contact dewatering machine

IFAT Munich 2022

06/06/22 Welcome back IFAT Munich! IFAT 2020 was cancelled due to pandemic and in 2022, IFAT reopens as the biggest environmental trade show in the

Read More »
Contactless Swingmill

Cavity Air Flotation Sludge

03/10/19 DSM-121-S Swingmill VS CAF sludge The Swingmill mobile system with two chemical tanks recently conducted a test to dewater CAF sludge from a glass

Read More »
Mini sludge dewatering screw press

Swingmill DSM-121-S

01/01/19 DSM-121-S Mini Swingmill is born The smallest dewatering machine, the Swingmill system with two chemical tanks available now for pilot test.  Contact us to book

Read More »
Swingmill 501 twin screwpress

Swingmill DSM-501-S

01/10/18 Fully operational at an abattoir Abattoir sludge treatment and dissolved air flotation dewatering.  The latest Swingmill design is now fully operational at an abattoir. 

Read More »
swingmill screwpress

Swingmill Upgrade

20/06/18 The new 2018 edition Swingmill dewatering system The new updated Swingmill, just rolled off the press, ready to be shipped out.  The upgrades will make

Read More »
dewllink white logo

Sludge Treatment Pioneer, Continue to innovate, advance, and exceed, providing customers with a fulfilling experience from design to final installation.

Services For :-

Food & Drinks
Manufacturing
Agriculture & Abattoir
Pharmaceutical & Chemicals
Paper Making
Municipal Waste Water
Mining & Petroleum

Contact Info :-

Dewlink Sludge Treatment Ltd

Unit A1, Hortonwood 10, Telford,

Shropshire, TF1 7ES, UK